DL Series
| MODELS | DL-2214 | DL-3214 |
|---|---|---|
| X-axis travel | 2,260 mm | 3,260 mm |
| Y-axis travel | 1,400 mm | |
| Z-axis travel | 820 mm | |
| Dist. from spindle nose to table top | 212 ~ 1,032 mm | |
| Dist. between columns | 1,400 mm | |
| WORKING TABLE | ||
| Table size ( X direction ) | 2,156 mm | 3,216 mm |
| Table size ( Y direction ) | 1,206 mm | |
| Table load capacity | 6,500 kg | 10,000 kg |
| SPINDLE | ||
| Spindle taper | BT50 | |
| Spindle speed | Direct-driven spindle 4,500 rpm ( Opt. 6,000 / 8,000 rpm ) | |
| Spindle motor ( cont. / 30 min ) | 15 / 18.5 kW ( Opt. 18.5 / 22 kW ) | |
| FEED RATE | ||
| X-axis rapid feed rate | 15 m/min | |
| Y-axis rapid feed rate | 15 m/min | |
| Z-axis rapid feed rate | 15 m/min | |
| Cutting feed rate | 10 m/min | |
| ACCURACY | ||
| Positioning accuracy ( JIS B 6338 ) | ± 0.005 mm / Full travel | |
| Positioning accuracy ( VDI 3441 ) | P ≤ 0.020 mm / Full travel | |
| Repeatability ( JIS B 6338 ) | ± 0.003 mm | |
| Repeatability ( VDI 3441 ) | Ps ≤ 0.003 mm | |
| ATC | ||
| Tool magazine capacity | Arm type 24 T ( Opt. 32T / 40T ) | |
| Max. tool diameter / adj. pocket empty | Ø 110 / Ø 220 mm | |
| Max. tool length | 350 mm | |
| Max. tool weight | 15 kg | |
| GENERAL | ||
| Power requirement | 52 kVA | 57 kVA |
| Pneumatic pressure requirement ( min. ) | 5 ~ 8 ( 5 ) kg/cm2 | |
| Hydraulic unit tank capacity ( pump ) | 140 liter ( 5 HP ) | |
| Lubrication oil tank capacity | 8 liter | |
| Coolant tank capacity ( pump ) | 370 liter ( 1 HP ) | |
| Machine weight | 18,000 kg | 24,000 kg |
Specifications are subject to change without notice.
Top