LH Series
| MODELS | LH-75R | LH-75I |
|---|---|---|
| X-axis travel | 700 mm | |
| Y-axis travel | 680 mm | |
| Z-axis travel | 625 mm | |
| Dist. from spindle nose to table center | 122 ~ 747 mm | |
| Dist. from spindle nose to column | 302 mm | |
| Dist. from spindle center to table | 0 ~ 660 mm | |
| Dist. from floor surface to table surface | 1,056 mm | |
| WORKING TABLE | ||
| Table size | 500 x 500 mm | |
| Indexing table ( B-axis ) | 500 x 500 mm | |
| T-slot ( width x no. x space) | 18 x 5 x 100 mm | |
| Table load capacity | 500 kg | |
| Max. work-piece height | 680 mm | |
| Min. indexing angle | 0.001° | 1° |
| SPINDLE | ||
| Spindle taper | BT40 | |
| Spindle speed | Belt drive 8,000 rpm ( Opt. 10,000 rpm ) | |
| Spindle motor ( cont. / 30 min ) | 11 / 15 kW | |
| FEED RATE | ||
| X-axis rapid feed rate | 36 m/min | |
| Y-axis rapid feed rate | 30 m/min | |
| Z-axis rapid feed rate | 36 m/min | |
| Cutting feed rate | 10 m/min | |
| ATC | ||
| ATC type | Arm type | |
| Tool magazine capacity | 24T | |
| Max. tool diameter / adj. pocket empty | Ø 78 / Ø 150 mm | |
| Max. tool length | 300 mm | |
| Max. tool weight | 7 kg | |
| ACCURACY | ||
| Positioning accuracy ( JIS B 6338 ) | ± 0.005 mm / Full travel | |
| Repeatability ( JIS B 6338 ) | ± 0.003 mm | |
| GENERAL | ||
| Control system | FANUC / MITSUBISHI / SIEMENS / HEIDENHAIN | Power requirement | 43 kVA |
| Coolant tank capacity | 250 liter | |
| Machine weight | 6,600 kg | |
| Floor Space ( L / W / H ) | 3,463 x 3,283 x 2,592 mm | |
Specifications are subject to change without notice.
Top